Mr. Lee (13802618519)
Ms. Tan (13356426611)
Dongjia Village,Xinhui Distinguish,Jiangmen City,Guangdong Province of China
The new hydraulic machine for double-sides-milling cross-shaped-keys is an advanced second-generation device invented by our factory, which is used for processing the grooves of the cross-shaped-keys. It has the following characteristics:
1. It adopts a structure of double hydro-cylinders and clamp with a cone-hole (This structure has been patented.) and also adopts an enlarged base of the lathe-head, which makes it clamp key blanks more firmly, reduces the cutting noise and stabilizes the quality of the products.
2. It adopts the Siemens PLC, which lengthens the life of the machine and makes it more accurate when cutting the key blanks.
3. There is a funnel for auto-feeding materials, so that a worker can take charge of 3~4 devices at the same time, which greatly cuts the cost of production.
4. There is an auto-protection function for protecting the cutters. When the cutters are blunt, the machine will give an alarm and stop automatically, to prevent the cutters from being damaged.
Main technical parameters:
1. Working efficiency: 16~19 keys per minute
2. Geometric tolerance of products: ±0.05mm
3. Rotation rate of the principal shaft: 700r/min
4. Frequency of changing the cutters: once/3h
5. Motor of the principal shaft: 1.1kW X2 motors
6. Motor of the oil pump: 1.5kW X1 motor
7. External size: Length 1100mm, Width 1600mm, Height 1100mm.